Downloads

  • IsoDim

    Download IsoDim for MicroStation
    Go to download
    • IsoDim - v. 10.14.04.08 - 12/18/2020 - 17.3MB
    • IsoDim - v. 10.07.04.07 - 1/29/2018 - 17.3MB
    • IsoDim - v. 10.05.04.06 - 6/26/2017 - 17.3MB
    • IsoDim - v. 08.11.03.08 - 4/9/2014 - 8.6MB
    • Installation manual

      ISY CAD INSTALLATION MANUAL

      Download ISY CAD application from the link above. Follow the installation procedure step by step and extract the ISY CAD application to an empty folder. Default folder is C:\isycad_downloads.

      The ISY CAD application is now ready for installation in MicroStaion. The installation can be done semi-automatic or manually:

      SEMI AUTOMATIC INSTALLATION
      In the folder where the ISY CAD application was extracted (normally C:\isycad_downloads), you will find a *.ma-file. The name will be a bit different depending on which version of MicroStation ISY CAD is created for:

      • Install_v8i.ma for MicroStation v8i
      • Install_xm.ma for MicroStation XM Edition
      • Install_v8.ma for MicroStation 2004 Edition

      Start MicroStation and drag this ma-file into one of the views. The installation program will now start.

      You can also start the installation by using key-in. Open the key-in window in MicroStation (in the Utilities menu) and type in MDL LOAD {PATH TO *.MA-FILE}

      Key-in example for MicroStation v8i: MDL LOAD C:\ISYCAD_Downloads\Install_v8i

      Follow the installation procedure step by step.

      NB! .net addin files will not work on a network share due to MicroSofts security policy. The files in the addin-folder should be placed locally. Default location of .net addins is C:\ISYCAD_v8i\mdlapps\addin\bin. In the TCMain.cfg-file the path is defined in the variable TC_LOCAL_DIR.

      Before running the installation of ISY CAD, all existing MicroStation applications added in the variable MS_DGNAPPS should be closed before running installation of ISY CAD. If not, the installation might fail to overwrite some config files.

      AUTOMATIC START OF APPLICATION
      if you want ISY CAD to be started on load of MicroStation or PowerDraft, some minor changes can be done in the TCMain.cfg-file.

      Uncomment the MS_DGNAPPS-variable and add the ISY CAD application to this variable. For instance, ISY CAD PeaNuts can be added by typing: MS_DGNAPPS > peanuts. If you prefer several applications to start on load, add a new line starting with MS_DGNAPPS > {application name}

       

      MANUAL INSTALLATION FOR MICROSTATION V8I

      1. Copy the files in C:\isycad_downloads.
        Copy the content of C:\isycad_downloads to the folder you want to have the ISY CAD application(s), for instance C:\ISYCAD_v8i\
        • If installation on network share:
          .net addin files will not work on a network share due to MicroSofts security policy. The files in the addin-folder should be placed locally on each computer. Default location of .net addins is C:\ISYCAD_v8i\mdlapps\addin\bin. In the TCMain.cfg-file the path is defined in the variable TC_LOCAL_DIR.
      2. Changes in TCMain.cfg
        Open TCMain.cfg in a text editor. TCMain.cfg is located in the config-folder. Change the variable TC_DIR to the folder you have moved the ISY CAD application(s) to. The TC_LOCAL_DIR should also be changed to the local ISY CAD root-folder where the .net addins is placed.
      3. Move TCMain.cfg
        Move TCMain.cfg to the config\appl-folder for MicroStation. Standard location for this folder is "C:\Program Files\Bentley\Program\MicroStation\config\appl\".

      LICENSE FILE
      The license file should be named tcappl.lic and should be placed in the license folder. Default location is C:\ISYCAD_v8i\license.

      ADVANCED SETUP
      All ISY CAD applications for MicroStation can be installed in custom ways on Citrix, network shares, installation packages and of course  locally in other locations than default. The licensing system also allows floating licenses and site/company licensing.

       

      NEED HELP?
      Please don't hesitate to contact us  on email suppport.isycad@nois.no if you need help with installation, licensing or have questions about our applications.

    • User manual

      The user manual for this application is attached in the installation file.

    • System requirements

      This ISY CAD application will only run on the following MicroStation applications:

      • MicroStation CONNECT Edition
      • PowerDraft CONNECT Edition
      • MicroStation v8i
      • MicroStation PowerDraft v8i

      Have a look at www.bentley.com for information about the system requirements for MicroStation.

    • Download previous versions

  • PeaNuts

    Download PeaNuts for MicroStation
    Go to download
    • Peanuts - v. 10.16.12.48 - 12/23/2021 - 27.3MB
    • Peanuts - v. 10.16.12.47 - 10/14/2021 - 27.3MB
    • Peanuts - v. 10.16.12.44 - 9/2/2021 - 27.4MB
    • Peanuts - v. 10.14.12.43 - 5/18/2021 - 27.4MB
    • PeaNuts - v. 10.14.12.42 - 10/15/2020 - 27.4MB
    • PeaNuts - v. 10.14.12.41 - 10/12/2020 - 27.4MB
    • PeaNuts - v. 10.13.12.40 - 5/26/2020 - 27.1MB
    • Peanuts - v. 10.13.12.39 - 5/22/2020 - 27.1MB
    • Peanuts - v. 10.13.12.38 - 4/24/2020 - 27.1MB
    • Peanuts - v. 10.13.12.37 - 4/15/2020 - 27.1MB
    • PeaNuts - v. 10.13.12.33 - 11/25/2019 - 27.2MB
    • PeaNuts - v. 10.11.12.25 - 12/10/2018 - 27.0MB
    • PeaNuts - v. 08.11.11.76 - 11/30/2016 - 26.0MB
    • PeaNuts - v. 08.11.11.70 - 5/28/2014 - 25.3MB
    • PeaNuts - v. 08.11.11.66 - 3/26/2014 - 25.3MB
    • Installation manual

      ISY CAD INSTALLATION MANUAL

      Download ISY CAD application from the link above. Follow the installation procedure step by step and extract the ISY CAD application to an empty folder. Default folder is C:\isycad_downloads.

      The ISY CAD application is now ready for installation in MicroStaion. The installation can be done semi-automatic or manually:

      SEMI AUTOMATIC INSTALLATION
      In the folder where the ISY CAD application was extracted (normally C:\isycad_downloads), you will find a *.ma-file. The name will be a bit different depending on which version of MicroStation ISY CAD is created for:

      • Install_v8i.ma for MicroStation v8i
      • Install_xm.ma for MicroStation XM Edition
      • Install_v8.ma for MicroStation 2004 Edition

      Start MicroStation and drag this ma-file into one of the views. The installation program will now start.

      You can also start the installation by using key-in. Open the key-in window in MicroStation (in the Utilities menu) and type in MDL LOAD {PATH TO *.MA-FILE}

      Key-in example for MicroStation v8i: MDL LOAD C:\ISYCAD_Downloads\Install_v8i

      Follow the installation procedure step by step.

      NB! .net addin files will not work on a network share due to MicroSofts security policy. The files in the addin-folder should be placed locally. Default location of .net addins is C:\ISYCAD_v8i\mdlapps\addin\bin. In the TCMain.cfg-file the path is defined in the variable TC_LOCAL_DIR.

      Before running the installation of ISY CAD, all existing MicroStation applications added in the variable MS_DGNAPPS should be closed before running installation of ISY CAD. If not, the installation might fail to overwrite some config files.

      AUTOMATIC START OF APPLICATION
      if you want ISY CAD to be started on load of MicroStation or PowerDraft, some minor changes can be done in the TCMain.cfg-file.

      Uncomment the MS_DGNAPPS-variable and add the ISY CAD application to this variable. For instance, ISY CAD PeaNuts can be added by typing: MS_DGNAPPS > peanuts. If you prefer several applications to start on load, add a new line starting with MS_DGNAPPS > {application name}

       

      MANUAL INSTALLATION FOR MICROSTATION V8I

      1. Copy the files in C:\isycad_downloads.
        Copy the content of C:\isycad_downloads to the folder you want to have the ISY CAD application(s), for instance C:\ISYCAD_v8i\
        • If installation on network share:
          .net addin files will not work on a network share due to MicroSofts security policy. The files in the addin-folder should be placed locally on each computer. Default location of .net addins is C:\ISYCAD_v8i\mdlapps\addin\bin. In the TCMain.cfg-file the path is defined in the variable TC_LOCAL_DIR.
      2. Changes in TCMain.cfg
        Open TCMain.cfg in a text editor. TCMain.cfg is located in the config-folder. Change the variable TC_DIR to the folder you have moved the ISY CAD application(s) to. The TC_LOCAL_DIR should also be changed to the local ISY CAD root-folder where the .net addins is placed.
      3. Move TCMain.cfg
        Move TCMain.cfg to the config\appl-folder for MicroStation. Standard location for this folder is "C:\Program Files\Bentley\Program\MicroStation\config\appl\".

      LICENSE FILE
      The license file should be named tcappl.lic and should be placed in the license folder. Default location is C:\ISYCAD_v8i\license.

      ADVANCED SETUP
      All ISY CAD applications for MicroStation can be installed in custom ways on Citrix, network shares, installation packages and of course  locally in other locations than default. The licensing system also allows floating licenses and site/company licensing.

       

      NEED HELP?
      Please don't hesitate to contact us  on email suppport.isycad@nois.no if you need help with installation, licensing or have questions about our applications.

    • User manual

      The user manual for this application is attached in the installation file.

    • System requirements

      This ISY CAD application will only run on the following MicroStation applications:

      • MicroStation CONNECT Edition
      • PowerDraft CONNECT Edition
      • MicroStation v8i
      • MicroStation PowerDraft v8i

      Have a look at www.bentley.com for information about the system requirements for MicroStation.

    • Download previous versions

  • PubEdit

    Download PubEdit for MicroStation
    Go to download
    • PubEdit - v. 10.16.8.37 - 8/22/2022 - 10.9MB
    • PubEdit - v. 10.16.8.36 - 8/17/2022 - 6.4MB
    • PubEdit - v. 10.16.8.35 - 4/29/2022 - 6.4MB
    • PubEdit - v. 10.16.8.33 - 10/20/2021 - 6.4MB
    • PubEdit - v. 10.16.8.31 - 10/15/2021 - 6.4MB
    • PubEdit - v. 10.16.8.30 - 9/15/2021 - 6.4MB
    • PubEdit - v. 10.16.8.29 - 9/3/2021 - 6.4MB
    • PubEdit - v. 10.16.8.28 - 8/19/2021 - 6.4MB
    • PubEdit - v. 10.13.8.25 - 5/26/2020 - 6.4MB
    • PubEdit - v. 10.13.8.24 - 5/22/2020 - 6.4MB
    • PubEdit - v. 10.13.8.23 - 4/24/2020 - 6.4MB
    • PubEdit - v. 10.13.8.22 - 4/15/2020 - 6.4MB
    • PubEdit - v. 10.13.8.21 - 2/7/2020 - 6.2MB
    • PubEdit - v. 10.07.08.17 - 8/31/2018 - 6.1MB
    • PubEdit - v. 08.11.07.34 - 12/21/2016 - 2.3MB
    • PubEdit - v. 08.11.07.10 - 8/14/2014 - 2.3MB
    • PubEdit - v. 08.11.06.27 - 9/27/2013 - 2.0MB
    • Installation manual

      ISY CAD INSTALLATION MANUAL

      Download ISY CAD application from the link above. Follow the installation procedure step by step and extract the ISY CAD application to an empty folder. Default folder is C:\isycad_downloads.

      The ISY CAD application is now ready for installation in MicroStaion. The installation can be done semi-automatic or manually:

      SEMI AUTOMATIC INSTALLATION
      In the folder where the ISY CAD application was extracted (normally C:\isycad_downloads), you will find a *.ma-file. The name will be a bit different depending on which version of MicroStation ISY CAD is created for:

      • Install_v8i.ma for MicroStation v8i
      • Install_xm.ma for MicroStation XM Edition
      • Install_v8.ma for MicroStation 2004 Edition

      Start MicroStation and drag this ma-file into one of the views. The installation program will now start.

      You can also start the installation by using key-in. Open the key-in window in MicroStation (in the Utilities menu) and type in MDL LOAD {PATH TO *.MA-FILE}

      Key-in example for MicroStation v8i: MDL LOAD C:\ISYCAD_Downloads\Install_v8i

      Follow the installation procedure step by step.

      NB! .net addin files will not work on a network share due to MicroSofts security policy. The files in the addin-folder should be placed locally. Default location of .net addins is C:\ISYCAD_v8i\mdlapps\addin\bin. In the TCMain.cfg-file the path is defined in the variable TC_LOCAL_DIR.

      Before running the installation of ISY CAD, all existing MicroStation applications added in the variable MS_DGNAPPS should be closed before running installation of ISY CAD. If not, the installation might fail to overwrite some config files.

      AUTOMATIC START OF APPLICATION
      if you want ISY CAD to be started on load of MicroStation or PowerDraft, some minor changes can be done in the TCMain.cfg-file.

      Uncomment the MS_DGNAPPS-variable and add the ISY CAD application to this variable. For instance, ISY CAD PeaNuts can be added by typing: MS_DGNAPPS > peanuts. If you prefer several applications to start on load, add a new line starting with MS_DGNAPPS > {application name}

       

      MANUAL INSTALLATION FOR MICROSTATION V8I

      1. Copy the files in C:\isycad_downloads.
        Copy the content of C:\isycad_downloads to the folder you want to have the ISY CAD application(s), for instance C:\ISYCAD_v8i\
        • If installation on network share:
          .net addin files will not work on a network share due to MicroSofts security policy. The files in the addin-folder should be placed locally on each computer. Default location of .net addins is C:\ISYCAD_v8i\mdlapps\addin\bin. In the TCMain.cfg-file the path is defined in the variable TC_LOCAL_DIR.
      2. Changes in TCMain.cfg
        Open TCMain.cfg in a text editor. TCMain.cfg is located in the config-folder. Change the variable TC_DIR to the folder you have moved the ISY CAD application(s) to. The TC_LOCAL_DIR should also be changed to the local ISY CAD root-folder where the .net addins is placed.
      3. Move TCMain.cfg
        Move TCMain.cfg to the config\appl-folder for MicroStation. Standard location for this folder is "C:\Program Files\Bentley\Program\MicroStation\config\appl\".

      LICENSE FILE
      The license file should be named tcappl.lic and should be placed in the license folder. Default location is C:\ISYCAD_v8i\license.

      ADVANCED SETUP
      All ISY CAD applications for MicroStation can be installed in custom ways on Citrix, network shares, installation packages and of course  locally in other locations than default. The licensing system also allows floating licenses and site/company licensing.

       

      NEED HELP?
      Please don't hesitate to contact us  on email suppport.isycad@nois.no if you need help with installation, licensing or have questions about our applications.

    • User manual

      The user manual for this application is attached in the installation file.

    • System requirements

      This ISY CAD application will only run on the following MicroStation applications:

      • MicroStation CONNECT Edition
      • PowerDraft CONNECT Edition
      • MicroStation v8i
      • MicroStation PowerDraft v8i

      Have a look at www.bentley.com for information about the system requirements for MicroStation.

    • Download previous versions

  • RasterEdit

    Download RasterEdit for MicroStation
    Go to download
    • RasterEdit - v. 10.13.16.0 - 12/9/2021 - 4.6MB
    • RasterEdit - v. 10.07.15.01 - 8/31/2018 - 4.6MB
    • RasterEdit - v. 08.11.05.16 - 12/13/2013 - 2.1MB
    • Installation manual

      ISY CAD INSTALLATION MANUAL

      Download ISY CAD application from the link above. Follow the installation procedure step by step and extract the ISY CAD application to an empty folder. Default folder is C:\isycad_downloads.

      The ISY CAD application is now ready for installation in MicroStaion. The installation can be done semi-automatic or manually:

      SEMI AUTOMATIC INSTALLATION
      In the folder where the ISY CAD application was extracted (normally C:\isycad_downloads), you will find a *.ma-file. The name will be a bit different depending on which version of MicroStation ISY CAD is created for:

      • Install_v8i.ma for MicroStation v8i
      • Install_xm.ma for MicroStation XM Edition
      • Install_v8.ma for MicroStation 2004 Edition

      Start MicroStation and drag this ma-file into one of the views. The installation program will now start.

      You can also start the installation by using key-in. Open the key-in window in MicroStation (in the Utilities menu) and type in MDL LOAD {PATH TO *.MA-FILE}

      Key-in example for MicroStation v8i: MDL LOAD C:\ISYCAD_Downloads\Install_v8i

      Follow the installation procedure step by step.

      NB! .net addin files will not work on a network share due to MicroSofts security policy. The files in the addin-folder should be placed locally. Default location of .net addins is C:\ISYCAD_v8i\mdlapps\addin\bin. In the TCMain.cfg-file the path is defined in the variable TC_LOCAL_DIR.

      Before running the installation of ISY CAD, all existing MicroStation applications added in the variable MS_DGNAPPS should be closed before running installation of ISY CAD. If not, the installation might fail to overwrite some config files.

      AUTOMATIC START OF APPLICATION
      if you want ISY CAD to be started on load of MicroStation or PowerDraft, some minor changes can be done in the TCMain.cfg-file.

      Uncomment the MS_DGNAPPS-variable and add the ISY CAD application to this variable. For instance, ISY CAD PeaNuts can be added by typing: MS_DGNAPPS > peanuts. If you prefer several applications to start on load, add a new line starting with MS_DGNAPPS > {application name}

       

      MANUAL INSTALLATION FOR MICROSTATION V8I

      1. Copy the files in C:\isycad_downloads.
        Copy the content of C:\isycad_downloads to the folder you want to have the ISY CAD application(s), for instance C:\ISYCAD_v8i\
        • If installation on network share:
          .net addin files will not work on a network share due to MicroSofts security policy. The files in the addin-folder should be placed locally on each computer. Default location of .net addins is C:\ISYCAD_v8i\mdlapps\addin\bin. In the TCMain.cfg-file the path is defined in the variable TC_LOCAL_DIR.
      2. Changes in TCMain.cfg
        Open TCMain.cfg in a text editor. TCMain.cfg is located in the config-folder. Change the variable TC_DIR to the folder you have moved the ISY CAD application(s) to. The TC_LOCAL_DIR should also be changed to the local ISY CAD root-folder where the .net addins is placed.
      3. Move TCMain.cfg
        Move TCMain.cfg to the config\appl-folder for MicroStation. Standard location for this folder is "C:\Program Files\Bentley\Program\MicroStation\config\appl\".

      LICENSE FILE
      The license file should be named tcappl.lic and should be placed in the license folder. Default location is C:\ISYCAD_v8i\license.

      ADVANCED SETUP
      All ISY CAD applications for MicroStation can be installed in custom ways on Citrix, network shares, installation packages and of course  locally in other locations than default. The licensing system also allows floating licenses and site/company licensing.

       

      NEED HELP?
      Please don't hesitate to contact us  on email suppport.isycad@nois.no if you need help with installation, licensing or have questions about our applications.

    • User manual

      The user manual for this application is attached in the installation file.

    • System requirements

      This ISY CAD application will only run on the following MicroStation applications:

      • MicroStation CONNECT Edition
      • PowerDraft CONNECT Edition
      • MicroStation v8i
      • MicroStation PowerDraft v8i

      Have a look at www.bentley.com for information about the system requirements for MicroStation.

    • Download previous versions

  • Rebar for MicroStation

    Download Rebar for Microstation
    Go to download
    • Rebar - v. 10.16.13.19 - 1/10/2022 - 20.5MB
    • Rebar - v. 10.16.13.18 - 11/17/2021 - 20.5MB
    • Rebar - v. 10.14.13.17 - 12/11/2020 - 20.5MB
    • Rebar - v. 10.14.13.16 - 12/9/2020 - 20.5MB
    • Rebar - v. 10.14.13.15 - 8/14/2020 - 20.5MB
    • Rebar - v. 10.14.13.14 - 6/10/2020 - 20.5MB
    • Rebar - v. 10.13.13.13 - 6/5/2020 - 20.5MB
    • Rebar - v. 10.13.13.12 - 5/14/2020 - 20.5MB
    • Rebar - v. 10.13.13.10 - 3/10/2020 - 20.5MB
    • Rebar - v. 10.13.13.9 - 3/6/2020 - 20.5MB
    • Rebar - v. 10.13.13.8 - 3/5/2020 - 20.5MB
    • Rebar - v. 10.13.13.7 - 2/7/2020 - 20.4MB
    • Rebar - v. 10.13.13.6 - 12/6/2019 - 20.4MB
    • Rebar - v. 10.13.13.5 - 12/5/2019 - 20.4MB
    • Rebar - v. 08.11.10.27 - 8/20/2021 - 12.5MB
    • Rebar - v. 08.11.10.23 - 9/16/2016 - 12.5MB
    • Rebar - v. 08.11.10.21 - 3/29/2016 - 12.2MB
    • Rebar - v. 08.11.10.20 - 3/14/2016 - 12.2MB
    • Rebar - v. 08.11.10.19 - 2/4/2014 - 12.2MB
    • Installation manual

      ISY CAD INSTALLATION MANUAL

      Download ISY CAD application from the link above. Follow the installation procedure step by step and extract the ISY CAD application to an empty folder. Default folder is C:\isycad_downloads.

      The ISY CAD application is now ready for installation in MicroStaion. The installation can be done semi-automatic or manually:

      SEMI AUTOMATIC INSTALLATION
      In the folder where the ISY CAD application was extracted (normally C:\isycad_downloads), you will find a *.ma-file. The name will be a bit different depending on which version of MicroStation ISY CAD is created for:

      • Install_v8i.ma for MicroStation v8i
      • Install_xm.ma for MicroStation XM Edition
      • Install_v8.ma for MicroStation 2004 Edition

      Start MicroStation and drag this ma-file into one of the views. The installation program will now start.

      You can also start the installation by using key-in. Open the key-in window in MicroStation (in the Utilities menu) and type in MDL LOAD {PATH TO *.MA-FILE}

      Key-in example for MicroStation v8i: MDL LOAD C:\ISYCAD_Downloads\Install_v8i

      Follow the installation procedure step by step.

      NB! .net addin files will not work on a network share due to MicroSofts security policy. The files in the addin-folder should be placed locally. Default location of .net addins is C:\ISYCAD_v8i\mdlapps\addin\bin. In the TCMain.cfg-file the path is defined in the variable TC_LOCAL_DIR.

      Before running the installation of ISY CAD, all existing MicroStation applications added in the variable MS_DGNAPPS should be closed before running installation of ISY CAD. If not, the installation might fail to overwrite some config files.

      AUTOMATIC START OF APPLICATION
      if you want ISY CAD to be started on load of MicroStation or PowerDraft, some minor changes can be done in the TCMain.cfg-file.

      Uncomment the MS_DGNAPPS-variable and add the ISY CAD application to this variable. For instance, ISY CAD PeaNuts can be added by typing: MS_DGNAPPS > peanuts. If you prefer several applications to start on load, add a new line starting with MS_DGNAPPS > {application name}

       

      MANUAL INSTALLATION FOR MICROSTATION V8I

      1. Copy the files in C:\isycad_downloads.
        Copy the content of C:\isycad_downloads to the folder you want to have the ISY CAD application(s), for instance C:\ISYCAD_v8i\
        • If installation on network share:
          .net addin files will not work on a network share due to MicroSofts security policy. The files in the addin-folder should be placed locally on each computer. Default location of .net addins is C:\ISYCAD_v8i\mdlapps\addin\bin. In the TCMain.cfg-file the path is defined in the variable TC_LOCAL_DIR.
      2. Changes in TCMain.cfg
        Open TCMain.cfg in a text editor. TCMain.cfg is located in the config-folder. Change the variable TC_DIR to the folder you have moved the ISY CAD application(s) to. The TC_LOCAL_DIR should also be changed to the local ISY CAD root-folder where the .net addins is placed.
      3. Move TCMain.cfg
        Move TCMain.cfg to the config\appl-folder for MicroStation. Standard location for this folder is "C:\Program Files\Bentley\Program\MicroStation\config\appl\".

      LICENSE FILE
      The license file should be named tcappl.lic and should be placed in the license folder. Default location is C:\ISYCAD_v8i\license.

      ADVANCED SETUP
      All ISY CAD applications for MicroStation can be installed in custom ways on Citrix, network shares, installation packages and of course  locally in other locations than default. The licensing system also allows floating licenses and site/company licensing.

       

      NEED HELP?
      Please don't hesitate to contact us  on email suppport.isycad@nois.no if you need help with installation, licensing or have questions about our applications.

    • User manual

      The user manual for this application is attached in the installation file.

    • System requirements

      This ISY CAD application will only run on the following MicroStation applications:

      • MicroStation CONNECT Edition
      • PowerDraft CONNECT Edition
      • MicroStation v8i
      • MicroStation PowerDraft v8i

      Have a look at www.bentley.com for information about the system requirements for MicroStation.

    • Download previous versions

  • Rebar for Revit

    Download Rebar for Revit.
    Go to download
    • Rebar - v. 22.8.38 - 6/2/2022 - 119.3MB
    • Rebar - v. 20.8.33 - 4/16/2020 - 105.2MB
    • Rebar - v. 19.8.30 - 2/1/2020 - 102.8MB
    • Rebar - v. 18.8.18 - 11/1/2017 - 100.0MB
    • Rebar - v. 17.7.33 - 11/1/2018 - 98.9MB
    • Installation manual

      Automatic installation

      Our ISY CAD applications for Revit will automatically be installed on correct location. It is not necessary with manual configuration to get the application up and running.

      1. Close Revit before installing.
      2. Download the ISY CAD application and double click on the msi-file
      3. Follow the instruction step by step.
      4. The ISY CAD application will now be installed. When installation is finished, open Revit and you will find that the tab "ISY CAD" is created. The application is placed inside this tab.
    • User manual

      The user manual for this application is attached in the installation file.

    • System requirements

      This ISY CAD application for Revit has the following system requirements

      • 64-bit Windows
      • Revit 2016, 2017, 2018, 2019 or 2020

      For specific requirements for Revit 2016, 2017, 2018, 2019 or 2020, please visit www.autodesk.com for more information.

      If there are applications for older versions of Revit, they will have the following system requirements:

      Versjon 2015:

      • 64-bit Windows
      • Revit Architecture 2015
      • Revit Structure 2015
      • Revit MEP 2015

      Versjon 2014:

      • 64-bit Windows
      • Revit Architecture 2014
      • Revit Structure 2014
      • Revit MEP 2014

      Versjon 2013:

      • 32bit or 64-bit Windows
      • Revit Architecture 2013
      • Revit Structure 2013
      • Revit MEP 2013

      For specific requirements for these Revit versions, please visit www.autodesk.com for more information.

       

  • Safety for Revit

    Download Safety for Revit
    Go to download
    • Safety for Revit 2023 - v. 23.3.10 - 8/26/2022 - 326.3MB
    • Safety for Revit 2023 - v. 23.3.9 - 6/16/2022 - 326.3MB
    • Safety for Revit 2020 v.20.3.3 - v. 20.3.3 - 10/11/2019 - 293.6MB
    • Safety - v. 19.3.3 - 6/19/2018 - 252.1MB
    • Safety - v. 18.2.16 - 10/17/2017 - 250.8MB
    • Safety - v. 17.2.13 - 10/17/2017 - 245.7MB
    • Installation manual

      Automatic installation

      Our ISY CAD applications for Revit will automatically be installed on correct location. It is not necessary with manual configuration to get the application up and running.

      1. Close Revit before installing.
      2. Download the ISY CAD application and double click on the msi-file
      3. Follow the instruction step by step.
      4. The ISY CAD application will now be installed. When installation is finished, open Revit and you will find that the tab "ISY CAD" is created. The application is placed inside this tab.
    • User manual

      The user manual for this application is attached in the installation file.

    • System requirements

      This ISY CAD application for Revit has the following system requirements

      • 64-bit Windows
      • Revit 2016, 2017, 2018, 2019 or 2020

      For specific requirements for Revit 2016, 2017, 2018, 2019 or 2020, please visit www.autodesk.com for more information.

      If there are applications for older versions of Revit, they will have the following system requirements:

      Versjon 2015:

      • 64-bit Windows
      • Revit Architecture 2015
      • Revit Structure 2015
      • Revit MEP 2015

      Versjon 2014:

      • 64-bit Windows
      • Revit Architecture 2014
      • Revit Structure 2014
      • Revit MEP 2014

      Versjon 2013:

      • 32bit or 64-bit Windows
      • Revit Architecture 2013
      • Revit Structure 2013
      • Revit MEP 2013

      For specific requirements for these Revit versions, please visit www.autodesk.com for more information.

       

  • Steel
    Go to download
    • Steel - v. 10.14.1.7 - 2/11/2021 - 19.1MB
    • Steel - v. 10.14.1.6 - 1/4/2021 - 19.2MB
    • Steel - v. 10.14.1.5 - 12/22/2020 - 19.1MB
    • Installation manual

      ISY CAD INSTALLATION MANUAL

      Download ISY CAD application from the link above. Follow the installation procedure step by step and extract the ISY CAD application to an empty folder. Default folder is C:\isycad_downloads.

      The ISY CAD application is now ready for installation in MicroStaion. The installation can be done semi-automatic or manually:

      SEMI AUTOMATIC INSTALLATION
      In the folder where the ISY CAD application was extracted (normally C:\isycad_downloads), you will find a *.ma-file. The name will be a bit different depending on which version of MicroStation ISY CAD is created for:

      • Install_v8i.ma for MicroStation v8i
      • Install_xm.ma for MicroStation XM Edition
      • Install_v8.ma for MicroStation 2004 Edition

      Start MicroStation and drag this ma-file into one of the views. The installation program will now start.

      You can also start the installation by using key-in. Open the key-in window in MicroStation (in the Utilities menu) and type in MDL LOAD {PATH TO *.MA-FILE}

      Key-in example for MicroStation v8i: MDL LOAD C:\ISYCAD_Downloads\Install_v8i

      Follow the installation procedure step by step.

      NB! .net addin files will not work on a network share due to MicroSofts security policy. The files in the addin-folder should be placed locally. Default location of .net addins is C:\ISYCAD_v8i\mdlapps\addin\bin. In the TCMain.cfg-file the path is defined in the variable TC_LOCAL_DIR.

      Before running the installation of ISY CAD, all existing MicroStation applications added in the variable MS_DGNAPPS should be closed before running installation of ISY CAD. If not, the installation might fail to overwrite some config files.

      AUTOMATIC START OF APPLICATION
      if you want ISY CAD to be started on load of MicroStation or PowerDraft, some minor changes can be done in the TCMain.cfg-file.

      Uncomment the MS_DGNAPPS-variable and add the ISY CAD application to this variable. For instance, ISY CAD PeaNuts can be added by typing: MS_DGNAPPS > peanuts. If you prefer several applications to start on load, add a new line starting with MS_DGNAPPS > {application name}

       

      MANUAL INSTALLATION FOR MICROSTATION V8I

      1. Copy the files in C:\isycad_downloads.
        Copy the content of C:\isycad_downloads to the folder you want to have the ISY CAD application(s), for instance C:\ISYCAD_v8i\
        • If installation on network share:
          .net addin files will not work on a network share due to MicroSofts security policy. The files in the addin-folder should be placed locally on each computer. Default location of .net addins is C:\ISYCAD_v8i\mdlapps\addin\bin. In the TCMain.cfg-file the path is defined in the variable TC_LOCAL_DIR.
      2. Changes in TCMain.cfg
        Open TCMain.cfg in a text editor. TCMain.cfg is located in the config-folder. Change the variable TC_DIR to the folder you have moved the ISY CAD application(s) to. The TC_LOCAL_DIR should also be changed to the local ISY CAD root-folder where the .net addins is placed.
      3. Move TCMain.cfg
        Move TCMain.cfg to the config\appl-folder for MicroStation. Standard location for this folder is "C:\Program Files\Bentley\Program\MicroStation\config\appl\".

      LICENSE FILE
      The license file should be named tcappl.lic and should be placed in the license folder. Default location is C:\ISYCAD_v8i\license.

      ADVANCED SETUP
      All ISY CAD applications for MicroStation can be installed in custom ways on Citrix, network shares, installation packages and of course  locally in other locations than default. The licensing system also allows floating licenses and site/company licensing.

       

      NEED HELP?
      Please don't hesitate to contact us  on email suppport.isycad@nois.no if you need help with installation, licensing or have questions about our applications.

    • User manual

      The user manual for this application is attached in the installation file.

    • System requirements

      This ISY CAD application will only run on the following MicroStation applications:

      • MicroStation CONNECT Edition
      • PowerDraft CONNECT Edition
      • MicroStation v8i
      • MicroStation PowerDraft v8i

      Have a look at www.bentley.com for information about the system requirements for MicroStation.